Broachcutter® TCT Cutters are made with Special-purpose carbide tips for reduced damage of tips & better endurance. These are suitable for cutting holes on various materials with high speed. Multi-cut geometry results in increased chip removal and less resistance.
 Depth Of cut Up to 35 mm |
 Diameter12mm-100mm |
Pilot Pin Dia. 6.35mm x 90mm (L) (Ø12 – 17) Dia. 7.98mm x 90mm (L) (Ø18 – 60) Dia. 7.98mm x 108mm (L) (Ø61 – 100) |
| Depth Of cut Up to 50 mm |
Diameter 12mm-100mm |
Pilot Pin Dia. 6.35mm x 106mm (L) (Ø12 – 17) Dia. 7.98mm x 108mm (L) (Ø18 – 60) Dia. 7.98mm x 113mm (L) (Ø61 100) |
| Depth Of cut Up to 75 mm |
Diameter 18mm-100mm |
Pilot Pin Dia. 7.98mm x 130mm (L) (Ø18 -60) Dia. 7.98mm x 130mm (L) (Ø18 -60) Dia. 7.98mm x 145mm (L) (Ø61 -100) |
| Depth Of cut Up to 100 mm |
Diameter 18mm-100mm |
Pilot Pin Dia. 7.98mm x 160mm (L) (Ø18 – 60) Dia. 7.98mm x 160mm (L) (Ø18 – 60) Dia. 7.98mm x 175mm (L) (Ø61 -100) Dia. 7.98mm x 184mm (L) – Two Part (Ø61 -100) |
● Special sizes and Inch Diameter Cutters are Available on Order
● Cutters are also Available in Universal & other Shanks
● Weldon shank 19.05mm(3/4”) for Diameter from 12mm to 60mm 31.75mm Weldon shank for Diameter from 61mm to 100mm
● Precisely Machined and Hardened Pilot pins for exactly locating Punch mark
● Universal Adapter
19.05mm shank with 3 ball grooves / Pilot Pin Dia. 6.35mm to allow using Broachcutter® Annular Cutters on Magnetic Base Drilling Machines having One-Touch Arbors.
Part No. 160001
Universal Adapter same as 160001 however with Pilot Pin Dia. 7.98mm
Part No. 160003
● Quick-In Adapter
19.05mm shank with 4 ball grooves / Pilot Pin Dia. 6.35mm to allow using Broachcutter® Annular Cutters on Magnetic Base Drilling Machines having One-Touch Arbors.
Part No. 160002
Quick-In Adapter same as 160002 however withPilot Pin Dia. 7.98mm
Part No. 160004
TCT Annular Cutters – Diameter, Depth of Cut & Part No. Chart of Standard Sizes
Enquire for Fractional and Non-Standard Size Cutters
| Diameter | Depth of Cut, 35 mm | Depth of Cut, 50 mm | Depth of Cut, 75 mm | Depth of Cut, 100 mm |
| mm | Part No. | Part No. | Part No. | Part No. |
| 12 | 200112 | 200012 | ||
| 13 | 200113 | 200013 | ||
| 14 | 200114 | 200014 | ||
| 15 | 200115 | 200015 | ||
| 16 | 200116 | 200016 | ||
| 17 | 200117 | 200017 | ||
| 18 | 200118 | 200018 | 200318 | 200418 |
| 19 | 200119 | 200019 | 200319 | 200419 |
| 20 | 200120 | 200020 | 200320 | 200420 |
| 21 | 200121 | 200021 | 200321 | 200421 |
| 22 | 200122 | 200022 | 200322 | 200422 |
| 23 | 200123 | 200023 | 200323 | 200423 |
| 24 | 200124 | 200024 | 200324 | 200424 |
| 25 | 200125 | 200025 | 200325 | 200425 |
| 26 | 200126 | 200026 | 200326 | 200426 |
| 27 | 200127 | 200027 | 200327 | 200427 |
| 28 | 200128 | 200028 | 200328 | 200428 |
| 29 | 200129 | 200029 | 200329 | 200429 |
| 30 | 200130 | 200030 | 200330 | 200430 |
| 31 | 200131 | 200031 | 200331 | 200431 |
| 32 | 200132 | 200032 | 200332 | 200432 |
| 33 | 200133 | 200033 | 200333 | 200433 |
| 34 | 200134 | 200034 | 200334 | 200434 |
| 35 | 200135 | 200035 | 200335 | 200435 |
| 36 | 200136 | 200036 | 200336 | 200436 |
| 37 | 200137 | 200037 | 200337 | 200437 |
| 38 | 200138 | 200038 | 200338 | 200438 |
| 39 | 200139 | 200039 | 200339 | 200439 |
| 40 | 200140 | 200040 | 200340 | 200440 |
| 41 | 200141 | 200041 | 200341 | 200441 |
| 42 | 200142 | 200042 | 200342 | 200442 |
| 43 | 200143 | 200043 | 200343 | 200443 |
| 44 | 200144 | 200044 | 200344 | 200444 |
| 45 | 200145 | 200045 | 200345 | 200445 |
| 46 | 200146 | 200046 | 200346 | 200446 |
| 47 | 200147 | 200047 | 200347 | 200447 |
| 48 | 200148 | 200048 | 200348 | 200448 |
| 49 | 200149 | 200049 | 200349 | 200449 |
| 50 | 200150 | 200050 | 200350 | 200450 |
| 51 | 200151 | 200051 | 200351 | 200451 |
| 52 | 200152 | 200052 | 200352 | 200452 |
| 53 | 200153 | 200053 | 200353 | 200453 |
| 54 | 200154 | 200054 | 200354 | 200454 |
| 55 | 200155 | 200055 | 200355 | 200455 |
| 56 | 200156 | 200056 | 200356 | 200456 |
| 57 | 200157 | 200057 | 200357 | 200457 |
| 58 | 200158 | 200058 | 200358 | 200458 |
| 59 | 200159 | 200059 | 200359 | 200459 |
| 60 | 200160 | 200060 | 200360 | 200460 |
| 61 | 200161 | 200061 | 200361 | 200461 |
| 62 | 200162 | 200062 | 200362 | 200462 |
| 63 | 200163 | 200063 | 200363 | 200463 |
| 64 | 200164 | 200064 | 200364 | 200464 |
| 65 | 200165 | 200065 | 200365 | 200465 |
| 66 | 200166 | 200066 | 200366 | 200466 |
| 67 | 200167 | 200067 | 200367 | 200467 |
| 68 | 200168 | 200068 | 200368 | 200468 |
| 69 | 200169 | 200069 | 200369 | 200469 |
| 70 | 200170 | 200070 | 200370 | 200470 |
| 71 | 200171 | 200071 | 200371 | 200471 |
| 72 | 200172 | 200072 | 200372 | 200472 |
| 73 | 200173 | 200073 | 200373 | 200473 |
| 74 | 200174 | 200074 | 200374 | 200474 |
| 75 | 200175 | 200075 | 200375 | 200475 |
| 76 | 200176 | 200076 | 200376 | 200476 |
| 77 | 200177 | 200077 | 200377 | 200477 |
| 78 | 200178 | 200078 | 200378 | 200478 |
| 79 | 200179 | 200079 | 200379 | 200479 |
| 80 | 200180 | 200080 | 200380 | 200480 |
| 81 | 200181 | 200081 | 200381 | 200481 |
| 82 | 200182 | 200082 | 200382 | 200482 |
| 83 | 200183 | 200083 | 200383 | 200483 |
| 84 | 200184 | 200084 | 200384 | 200484 |
| 85 | 200185 | 200085 | 200385 | 200485 |
| 86 | 200186 | 200086 | 200386 | 200486 |
| 87 | 200187 | 200087 | 200387 | 200487 |
| 88 | 200188 | 200088 | 200388 | 200488 |
| 89 | 200189 | 200089 | 200389 | 200489 |
| 90 | 200190 | 200090 | 200390 | 200490 |
| 91 | 200191 | 200091 | 200391 | 200491 |
| 92 | 200192 | 200092 | 200392 | 200492 |
| 93 | 200193 | 200093 | 200393 | 200493 |
| 94 | 200194 | 200094 | 200394 | 200494 |
| 95 | 200195 | 200095 | 200395 | 200495 |
| 96 | 200196 | 200096 | 200396 | 200496 |
| 97 | 200197 | 200097 | 200397 | 200497 |
| 98 | 200198 | 200098 | 200398 | 200498 |
| 99 | 200199 | 200099 | 200399 | 200499 |
| 100 | 2001100 | 2000100 | 2003100 | 2004100 |
| Pilot Pins for TCT Cutters (Depth of Cut : 35mm) | ||||
| Part No. | Size | Weldon Shank Size | Dia. Range | Depth of Cut |
| 170007 | Ø 6.35mm X 90mm | 19.05mm | Ø 12-17mm | 35mm |
| 170008 | Ø 7.98mm X 90mm | 19.05mm | Ø 18-60mm | 35mm |
| Pilot Pins for TCT Cutters (Depth of Cut : 50mm) | ||||
| Part No. | Size | Weldon Shank Size | Dia. Range | Depth of Cut |
| 170009 | Ø 6.35mm X 106mm | 19.05mm | Ø 12-17mm | 50mm |
| 170010 | Ø 7.98mm X 108mm | 19.05mm | Ø 18-60mm | 50mm |
| 170012 | Ø 7.98mm X 113mm | 31.75mm | ≥ Ø 60mm | 50mm |
| Pilot Pins for TCT Cutters (Depth of Cut : 75mm) | ||||
| Part No. | Size | Weldon Shank Size | Dia. Range | Depth of Cut |
| 170011 | Ø 7.98mm X 130mm | 19.05mm | Ø 18-60mm | 75mm |
| 170003 | Ø 7.98mm X 130mm (Two-Part) | 19.05mm | Ø 18-60mm | 75mm |
| 170013 | Ø 7.98mm X 145mm | 31.75mm | ≥ Ø 60mm | 75mm |
| Pilot Pins for TCT Cutters (Depth of Cut : 100mm) | ||||
| Part No. | Size | Weldon Shank Size | Dia. Range | Depth of Cut |
| 170004 | Ø 7.98mm X 160mm | 19.05mm | Ø 18-60mm | 100mm |
| 170005 | Ø 7.98mm X 160mm (Two-Part) | 19.05mm | Ø 18-60mm | 100mm |
| 170014 | Ø 7.98mm X 175mm | 31.75mm | Ø 61-100mm | 100mm |
| 170015 | Ø 7.98mm X 184mm (Two-Part) | 31.75mm | Ø 61-100mm | 100mm |