:: BROACHCUTTER is promoted by Pioneer Intertrade (P) Ltd

HSS Annular Cutters

TCT Annular Cutters

BroachCutter HSS Annular Cutters (Core Drills)

BROACHCUTTER Annular Cutters are made of Special Blended HSS Alloy Steel which results in Edge Sharpness that lasts longer, drilling more holes than standard HSS cutters.

Their Multi-Cut geometry improves performance of centering as well as removal of chips.

BROACHCUTTER Shanks

BROACHCUTTER Annular Cutters are available with WELDON Shank of 19.05mm as well as 31.75 mm (for Cutter dia. > 65mm ) These cutters can also be used on Machines using cutters with UNIVERSAL shank ( One-touch shank) by using a simple adapter

BROACHCUTTER use on Workshop Machines

BROACHCUTTER Annular cutters are suitable for use also on Workshop drills, CNC Machining centres etc (using BROACHCUTTER Arbors) They eliminate step drilling and holes can be cut upto 3 times faster as compared to when using solid drills.

Pilot Pins

BROACHCUTTER Pilot Pins are made of specially hardened steel and retain point sharpness longer

HSS 25mm ( 1") Depth of Cut
From Dia. 12mm - 65mm
19.05mm Weldon Shank
Pilot Pin : Dia. 6.35mm x 77mm

HSS 50mm ( 2") Depth of Cut
From Dia. 12mm - 65mm
19.05mm Weldon Shank
Pilot Pin : Dia. 6.35mm x 102mm

HSS 75mm ( 3") Depth of Cut
From Dia. 18mm - 60mm
19.05mm Weldon Shank
Pilot Pin : Dia. 7.98mm x 130mm

HSS 100mm ( 4") Depth of Cut
From Dia. 18mm - 60mm
19.05mm Weldon Shank
Pilot Pin : Dia. 7.98mm x 160mm

HSS Annular Cutters
160001 Universal Adapter	UNIVERSAL ADAPTER - Designed to allow use of BroachCutter^® Annular Cutters of 19.05mm shank on magnetic Base Drilling Machines having One Touch Arbor of 19.05mm Bore	BroachCutter^® Pilot Pins are made of Specially Hardened Steel. These pins retain their center point sharpness for large number of drilling operations. The pins are ground on CNC machines to give smooth finish and precise circularity over the entire length. Two-Part Pilot Pins are available for long cutters.